Model DKZ-5000 Electric Cement Bending Testing Machine is mainly used for determining the cement mortar flexure strength in cement plant, construction unit, certain colledge, scientific reach department, and so on.
The max. Test force is 1000N when using single-lever, 5000N when double levers. There is conversion marks of fluxure strength and resistance special for cement motar on the tester scale. It can read to 0.4N and 0.001Mpa when the max test force is 1000N, 1N and 0.005Mpa when 5000N.
Model DKZ-5000 Electric Cement Bending Testing Machine is consisted by: Base, post, upper beam, long and short pulling pole, big and small lever, tilt angle indicated board, flexure jaw, moving weight, big and small balance weight, transmition motor, transmition screw and electric control box, and so on.
|Single lever test force ratio (upper beam arm distance ratio) (max.)||10:1|
|Double lever test force ratio (lower beam arm distance ratio) (max.)||50:1|
|Max. force value||Single lever||1000N|
|Loading speed||Single lever||10N/s|
|Flexure jaw||Diameter of loading roller and supporting roller distance||10mm|
|Supporting roller distance||100mm|
|Baffle plate span||46mm|
|Sensitivity||Levering the lever when using double levers, load 1g at 500mm lever distance to the supporting point.|
|Outline dimension (L×W×H)||(1075×250×760)mm|
|Net weight||about 85Kg|